Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who lost a key to their car may be concerned about the cost and hassle of getting the new key. Fortunately, there is a way to avoid these expenses by making your own key fob.
To do this, you'll require a flathead screwdriver. Put the screwdriver into the slot located in the middle of the case, and slowly work it open.
Cost
Most SAABs come with two keys when new, but certain used cars only have one. In this situation the owner will need to purchase an additional key, which can be expensive. There are a variety of ways to save on this procedure. If you just need to replace the key fob case and not the emergency key or badge, you can save some money by buying a used case from a dealer. However, you should be aware that these cases don't contain the badge or emergency key and are susceptible to wearing out quickly.
In addition to the cost of a brand new key, you also have to pay for the installation and programming of the TWICE module. These costs can quickly add up, especially if there is no spare key.
It is crucial to always have two keys in your vehicle. If you lose only one key, you won't be stranded with no transportation.
It's not as hard as it may seem to add a second Saab 9-3 key. The only issue with this is that the key has to be linked to your car's computer. This can be accomplished through a dealer, but it may take some time to schedule an appointment. You can find all the details you require on the internet to guide you through the process.
saab 93 key fob of Saab vehicles built after 1995 have a special immobilizer system that utilizes keys to control the engine of the car. The system also controls door locks and remote functions of the vehicle. It is essential to keep a spare to avoid losing the original key and risking having your vehicle taken. The good news is that in the event you lose your only working Saab key, there are ways to get it replaced without having to pay for the expense of a dealer service.
First, you need to make the new key fob. This can be done by using an flathead screwdriver to open the case open. Place the screwdriver in the small opening in the middle of the case, and gently move the screwdriver. If you're having trouble, try using different angles. After you've opened up the case, you're able to take out the electronics and place them in a new fob case.
You can begin the programming process when you have the replacement key and fob. You will have to connect your Tech2 and follow the steps for the NG 9-3 (with or without keys). It is recommended to use a replacement unit TWICE that is already fitted with the correct transponder and key. You can find this unit online. However, it is important to make sure that it is an OEM replacement.
Programming
A Tech 2 is required to add an additional key to the Saab 9-3. It also requires programming the car to recognize the new key. This is a much more complicated process than simply copying a metal key. It must be done by a professional to avoid damaging the electronic system of the vehicle. It is recommended to insert a spare car key as soon as you can. Waiting could lead to higher costs in the future.
In addition to putting in a replacement key, you'll need to replace the TWICE or CIM module. It's a postal process and cannot be buy from an aftermarket dealer. Depending on the model of your car it could cost quite expensive.
There's a solution to the dealer that is charging you the highest dollar to replace the car computer. S.A. Locksmith & Security can re-program your Saab computer to prepare it for the new key. This will reduce the expense of buying a new car computer. This service is fast and affordable, as well as simple. It can save you up to up to 50% or more when compared to what a dealership will charge you! This is a great solution for those who have lost their car keys.
Remotes
The Saab 9-3 Viggen is one of the most unique vehicles ever to wear the Saab badge. It was a Scandinavian, front-drive fighter jet-inspired beast that was fast and enjoyable to drive. Many other Saab models followed, but few were as original.
If you have a 9-3 Saab and lose the key fob it is crucial to replace it as fast as possible. Saab vehicles come with an immobilizer system, which requires a key that is unique to begin. If you have a spare key, the process of replacing it is easy. However, if you don't it can be costly and time-consuming.
You can save money if you purchase a used key fob replacement and then have it programmed locally by locksmiths. However, you should be cautious when purchasing used keys on eBay or other online retailers. They might not be genuine and you could end paying more in the end.
Anyone can remove the electronics and battery of an old key fob with the screwdriver's small flathead. Be careful not to scratch any of the small electronic components in the case. It is also important to avoid putting liquids on the inside of the case because it could cause damage. Additionally, you should not purchase a key cloned from any aftermarket sellers since they might not work with the CIM of your vehicle.